Scambiatore di calore fic

Heat recovery, Process Therm, condensers for exhaust gas

The heat exchangers built by FIC S.p.A with Pillow Plate technology for heat recovery have been used in a significant number of models across a range of industrial sectors. They are made of a series of Dimple Plates / Pillow Plates, whose number and dimensions vary depending on the process parameters, enclosed in a sectioned casing which is normally rectangular or circular. 

They have been created for liquid/gas exchange, and are particularly suitable in situations when the angles of the plates can provide subtle advantages. Some typical examples:

  •     When there are hot vapour emissions with a relative medium or high humidity content, using Dimple Plates means that it is possible to achieve high coefficients of heat exchange in the typical condensation conditions of these processes (for example, in the paper industry they can be used downstream of the air-to-air exchange sections in the Paper Machines Hall);
  •    When there are significant powder or fibre contents from gaseous currents from certain production processes. In this case the construction angles of the FIC S.p.A. exchangers allow a quick and easy clean, without needing complex machinery downtime and maintenance (such as in cement plants or in wood treatment plants);
  •     When the level of loss of gas load needs to be as controlled as possible (to reduce energy consumption of ventilators and also the associated investment costs);
  •     When it is necessary to reduce polluting components or those which have an environmental impact (odours), as the Pillow Plate angles are hugely beneficial for the condensation process in this case (for example in the animal feed industry).

In some cases the heat exchanger does not have a casing, for example when it should be inserted into the existing tank or vessel, such as overhead condensers in distillation columns, or in the example of thermal conditioning of certain fluids (oils, hydrocarbons etc). 

FIC S.p.A. also offers Process Therm in this range of exchangers.  This has been developed from heat exchangers with casings, but has additional sections to channel air for entry and exit, which are integrated with service equipment such as cleaning systems (tubes and nozzles), demisters, manholes and so on.
Process Therm units are used particularly when there is relative humidity and powder in the gaseous flow; a typical example is that of spray-drying units for producing powdered milk. With Process Therm it is possible to recover part of the energy from the waste air from the process which would otherwise be discharged into the atmosphere, and which instead can be used to heat the cool process air as it enters the unit.
FIC S.p.A. can create the thermal and construction dimensioning of both sections, for entry and exit.
The FIC S.p.A. exchangers can be built from all types of stainless steel or duplex steel, for conditions which fall into wide ranges of pressures and temperatures. They are designed using the calculation rules of regulation PED 2014/68/EU and also adhere to the calculation rules of AD2000, ASME, EN.

icona pdf
Download the catalogue
Heat recovery, Process Therm, condensers for exhaust gas
icona pdf
Download leaflet
Heat recovery, Process Therm, condensers for exhaust gas

Recommended because

  •     Heat recovery
  •     Paper industry
  •     Odour elimination
  •     Reduces loss of charge
  •     Design flexibility
  •     Can be paired with spray dryers
  •     For processes with powders present

Industry

Heat recovery, Process Therm, condensers for exhaust gas it is particularly indicated for:
Sistemi di controllo della temperatura per impianti chimici

Chemical industry

Sistemi per il recupero del calore

Heat Recovery

Check out other products

Immagine

THERMX

Gas Condenser FIC

Flue Gas Condensers

Heat exchanger

Bulk Solid Heat Exchangers

Scambiatori di calore FIC

FIC Heat Exchangers for other applications